Verus Engineering Dive Plane Kit Dual Elements Mk5 Toyota Supra
The Verus Engineering Dual Dive Planes Kit for the A90 MKV Toyota Supra was specifically designed to increase front-end downforce while keeping drag increase to a minimum. The units work together to aid in extracting airflow from the wheel well, as well as produce downforce themselves on the front axle of the car.
The dive planes produce a safe aero balance with or without the addition of our rear diffuser. These units were designed in CAD using in-house scan data and optimized using CFD analysis.
These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon, with a polished, high gloss finish.
Dive planes also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing, diffuser, or aiding with front grip in on track.
WHAT IS INCLUDED
Dive Plane, Upper Left
Dive Plane, Lower Left
Dive Plane, Upper Right
Dive Plane, Lower Right
3M VHB Tape (4 Pieces, 1 for each Dive Plane)
CFD Optimized for Improved Performance
Shift Aero Balance Forward (Improves Front End Grip)
Allows Fine-Tuning of Aero Balance (Forward Biased)
Simple, Non-invasive, Double-Sided Tape Installation with Templates (Included)
2x2 Weave, Autoclave Cured, 1.5mm Thick Carbon Fiber
Specifically Contoured and Designed to the Supra Bumper
3M VHB Double Sided Tape, Cut Specifically to Dive Plane Sizes
Templates to Aid During Install
Dive planes help tune the aerodynamic balance of a vehicle by shifting the balance for